- 8 Sections
- 55 Lessons
- 40 Hours
Expand all sectionsCollapse all sections
- PERSIAPAN2
- 1. NETWORK FUNDAMENTALS13
- 2.11.1 Explain the role and function of network components
- 2.21.2 Describe characteristics of network topology architectures
- 2.31.3 Compare physical interface and cabling types
- 2.41.4 Identify interface and cable issues (collisions, errors,mismatch duplex, and/or speed)
- 2.51.5 Compare TCP to UDP
- 2.61.6 Configure and verify IPv4 addressing and subnetting
- 2.71.7 Describe the need for private IPv4 addressing
- 2.81.8 Describe the need for private IPv4 addressing
- 2.91.9 Compare IPv6 address types
- 2.101.10 Verify IP parameters for Client OS (Windows, Mac OS,Linux)
- 2.111.11 Describe wireless principles
- 2.121.12 Explain virtualization fundamentals (virtual machines)
- 2.131.13 Describe switching concepts
- 2. NETWORK ACCESS9
- 3.12.1 Configure and verify VLANs (normal range) spanning multiple switches
- 3.22.2 Configure and verify interswitch connectivity
- 3.32.3 Configure and verify Layer 2 discovery protocols (CiscoDiscovery Protocol and LLDP)
- 3.42.4 Configure and verify (Layer 2/Layer 3) EtherChannel(LACP)
- 3.52.5 Describe the need for and basic operations of Rapid PVST+Spanning Tree Protocol and identify basic operations
- 3.62.6 Compare Cisco Wireless Architectures and AP modes
- 3.72.7 Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)
- 3.82.8 Describe AP and WLC management access connections(Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)
- 3.92.9 Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation,security settings, QoS profiles, and advanced WLAN settings
- 3. IP CONNECTIVITY5
- 4. IP SERVICES9
- 5.14.1 Configure and verify inside source NAT using static andpools
- 5.24.2 Configure and verify NTP operating in a client and server mode
- 5.34.3 Explain the role of DHCP and DNS within the network
- 5.44.4 Explain the function of SNMP in network operations
- 5.54.5 Describe the use of syslog features including facilities and levels
- 5.64.6 Configure and verify DHCP client and relay
- 5.74.7 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing,shaping
- 5.84.8 Configure network devices for remote access using SSH
- 5.94.9 Describe the capabilities and function of TFTP/FTP in the network
- 5. SECURITY FUNDAMENTALS10
- 6.15.1 Define key security concepts (threats, vulnerabilities,exploits, and mitigation techniques)
- 6.25.2 Describe security program elements (user awareness,training, and physical access control)
- 6.35.3 Configure device access control using local passwords
- 6.45.4 Describe security password policies elements, such asmanagement, complexity, and password alternatives(multifactorauthentication, certificates, and biometrics)
- 6.55.5 Describe remote access and site-to-site VPNs
- 6.65.6 Configure and verify access control lists
- 6.75.7 Configure Layer 2 security features (DHCP snooping,dynamic ARP inspection, and port security)
- 6.85.8 Differentiate authentication, authorization, and accounting concepts
- 6.95.9 Describe wireless security protocols (WPA, WPA2, and WPA3)
- 6.105.10 Configure WLAN using WPA2 PSK using the GUI
- 6. AUTOMATION AND PROGRAMMABILITY7
- 7.16.1 Explain how automation impacts network management
- 7.26.2 Compare traditional networks with controller-based networking
- 7.36.3 Describe controller-based and software defined architectures(overlay, underlay, and fabric)
- 7.46.4 Compare traditional campus device management with Cisco DNA Center enabled device management
- 7.56.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)
- 7.66.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible
- 7.76.7 Interpret JSON encoded data
- PENUTUPAN2
Post-Test
Prev