CCNA Exam Guide

Pemantapan materi, latihan & simulasi ujian sertifikasi CCNA Implementing and Administering Cisco Solutions (200-301 CCNA) dari Cisco. Topik ujian sertifikasi 200-301 CCNA meliputi network fundamentals, IP connectivity, IP services, network security fundamentals, dan automation & programmability

CONTENT

1. Network Fundamentals
1.1 Explain the role and function of network components
1.2 Describe characteristics of network topology architectures
1.3 Compare physical interface and cabling types
1.4 Identify interface and cable issues (collisions, errors,mismatch duplex, and/or speed)
1.5 Compare TCP to UDP
1.6 Configure and verify IPv4 addressing and subnetting
1.7 Describe the need for private IPv4 addressing
1.7 Describe the need for private IPv4 addressing
1.9 Compare IPv6 address types
1.10 Verify IP parameters for Client OS (Windows, Mac OS,Linux)
1.11 Describe wireless principles
1.12 Explain virtualization fundamentals (virtual machines)
1.13 Describe switching concepts

2. Network Access
2.1 Configure and verify VLANs (normal range) spanning multiple switches
2.2 Configure and verify interswitch connectivity
2.3 Configure and verify Layer 2 discovery protocols (CiscoDiscovery Protocol and LLDP)
2.4 Configure and verify (Layer 2/Layer 3) EtherChannel(LACP)
2.5 Describe the need for and basic operations of Rapid PVST+Spanning Tree Protocol and identify basic operations
2.6 Compare Cisco Wireless Architectures and AP modes
2.7 Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)
2.8 Describe AP and WLC management access connections(Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)
2.9 Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation,security settings, QoS profiles, and advanced WLAN settings

3. IP Connectivity
3.1 Interpret the components of a routing table
3.2 Determine how a router makes a forwarding decision by default
3.3 Configure and verify IPv4 and IPv6 static routing
3.4 Configure and verify single area OSPFv2
3.5 Describe the purpose of first hop redundancy protocol

4. IP Services
4.1 Configure and verify inside source NAT using static andpools
4.2 Configure and verify NTP operating in a client and server mode
4.3 Explain the role of DHCP and DNS within the network
4.4 Explain the function of SNMP in network operations
4.5 Describe the use of syslog features including facilities and levels
4.6 Configure and verify DHCP client and relay
4.7 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing,shaping
4.8 Configure network devices for remote access using SSH
4.9 Describe the capabilities and function of TFTP/FTP in the network

5. Security Fundamentals
5.1 Define key security concepts (threats, vulnerabilities,exploits, and mitigation techniques)
5.2 Describe security program elements (user awareness,training, and physical access control)
5.3 Configure device access control using local passwords
5.4 Describe security password policies elements, such asmanagement, complexity, and password alternatives(multifactorauthentication, certificates, and biometrics)
5.5 Describe remote access and site-to-site VPNs
5.6 Configure and verify access control lists
5.7 Configure Layer 2 security features (DHCP snooping,dynamic ARP inspection, and port security)
5.8 Differentiate authentication, authorization, and accounting concepts
5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)
5.10 Configure WLAN using WPA2 PSK using the GUI

6. Automation and Programmability
6.1 Explain how automation impacts network management
6.2 Compare traditional networks with controller-based networking
6.3 Describe controller-based and software defined architectures(overlay, underlay, and fabric)
6.4 Compare traditional campus device management with Cisco DNA Center enabled device management
6.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)
6.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible
6.7 Interpret JSON encoded data